Author Topic: WTS: Black Allen Hex Screws for CZ 75B, SP01, P-01, P-06, PCR, 40P & others  (Read 12229 times)

clemsonite

  • Guest
After lot of research and $$$ into finding the perfect fitting screws for my guns, I have found these. All you need is 2.5 Allen Key from your own tools to screw and unscrew these.
 
 I am selling them in sets of
2 Screws ($12 Including Shipping) or 4 Screws ($20 Including Shipping)
to replace your factory screws and you Do Not need washers for these screws. If you need more than 4 screws send me a PM and I will provide the price (With Great Discounts). PayPal Preferred Will accept USPS Money Order or Personal Checks.
 
 Make sure that you do not over tighten the screws. After you finger tighten the screw you need a 45 degree turn to get the grips secured.
 
 
Ask questions before buying. I know for sure these will fit perfectly (Tested on CZ75B & CZSP01) and are great addition to your guns.

Please check out the links below for feed back,
http://www.ebay.com/itm/330690334727?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649
Here is my Listing for 2 Sets:
http://www.ebay.com/itm/330615474121?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

 
Over 400 Sets Sold Here and on ebay with 100% Satisfaction from the Buyers
« Last Edit: May 22, 2014, 12:13:50 PM by clemsonite »

rcbloom2

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #1 on: October 06, 2011, 08:00:28 AM »
I need some clarification.  For $12 I get two or four screws? 

clemsonite

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #2 on: October 06, 2011, 09:20:04 AM »
Sorry for the confusion. $12 for 2 Screws & $20 for 4 Screws. I have great feedback for these screws on EBAY.

rcbloom2

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #3 on: October 09, 2011, 10:51:00 AM »
What is link for ebay.


clemsonite

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #5 on: November 03, 2011, 10:13:31 AM »
Please check my feedback on ebay for these screws.

Offline CZ-RAMI-2075

  • Hero Member
  • *****
  • Posts: 589
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #6 on: November 03, 2011, 02:34:58 PM »
HI, will they fit a P-01?

clemsonite

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #7 on: November 03, 2011, 02:43:09 PM »
I do not know for sure but, they have the same specs as factory issued CZ 75 screws. If you have both the guns please try to see if they are interchangable.
« Last Edit: November 03, 2011, 04:01:24 PM by clemsonite »

Offline GhostWarrior

  • I'm very humble, you can ask me.
  • Administrator
  • Hero Member
  • *****
  • Posts: 3039
  • Benefactor & Life Member NRA
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #8 on: December 20, 2011, 09:47:59 AM »
And the answer is yes they fit the P-01 sweet as you could wish for.look nice also.
 
Mery Christmas, and Happy Holidays
If at first you don't succeed, then Skydiving is not your sport.

Welcome Home every Veteran and active Service personnel and Thank you from the bottom of my heart for your sacrifice

clemsonite

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #9 on: December 20, 2011, 09:58:21 AM »
HI, will they fit a P-01?
Please see Ghost Warrior's response.

b5.5dan

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #10 on: December 20, 2011, 12:55:48 PM »
Nice screws. No need to make bump posts though. Thank you.

Offline GhostWarrior

  • I'm very humble, you can ask me.
  • Administrator
  • Hero Member
  • *****
  • Posts: 3039
  • Benefactor & Life Member NRA
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #11 on: December 21, 2011, 09:06:07 AM »
         Now no more bumps, it's a sticky and shall lead the parade here from now on. Merry Christmas, Happy Holidays, Best of times, Nemaste (only Indian greeting I know, even if it's more religious than just hello.) Any way you cut it, Thank you for finding these.
If at first you don't succeed, then Skydiving is not your sport.

Welcome Home every Veteran and active Service personnel and Thank you from the bottom of my heart for your sacrifice

clemsonite

  • Guest
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #12 on: January 17, 2012, 11:49:13 AM »
Thank you for making this a sticky. So Ghostwarrior, how did you like the stainless screws I sent you?

Offline GhostWarrior

  • I'm very humble, you can ask me.
  • Administrator
  • Hero Member
  • *****
  • Posts: 3039
  • Benefactor & Life Member NRA
Re: WTS: Black Allen Head Hex Screws for CZ 75B, SP01 & other Variants
« Reply #13 on: January 19, 2012, 12:31:45 AM »
Very nice btw and thank you. Hows the search for shorter screws for the RAMI and such pistols?
If at first you don't succeed, then Skydiving is not your sport.

Welcome Home every Veteran and active Service personnel and Thank you from the bottom of my heart for your sacrifice

clemsonite

  • Guest
I have already spent $60 to find other screws with no luck.