Author Topic: CZ P 10F feed issues  (Read 1818 times)

Offline Shempatolla

  • Newbie
  • *
  • Posts: 3
CZ P 10F feed issues
« on: June 18, 2019, 07:52:43 AM »
anyone else having fail to feed issues with their new P10F ?
Iíve got maybe 200 rounds through mine both 115 grain and 124 grain and am getting intermittent but regular failure to feed a round. Theyíre getting hung up on the feed ramp.
Donít know if itís me or the gun.  My Grand Power XTrim eats the same ammo with no issues.


Thoughts?

Offline Rodolfo Fierro

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 635
    • TRAIN 2 SHOOT
Re: CZ P 10F feed issues
« Reply #1 on: June 19, 2019, 07:30:35 AM »
When I first got my 75B it had the same problem.  It turned out to be that the "rim" of the cartridge was hanging up on the extractor.  I removed the extractor and rounded the corner of it and polished it.  That cleared my problem.  Your problem could be the same from the sounds of it.

Offline Shempatolla

  • Newbie
  • *
  • Posts: 3
Re: CZ P 10F feed issues
« Reply #2 on: June 19, 2019, 07:47:17 AM »
Thanks.
I took the gun into the shop where I bought it.
We took it apart.  There appears to be a burr or mushroomed edge on the feed ramp.
CZ warranty is involved.  They may end up sending a new barrel.