Forum Home

Shooter's Corner (Ask the Pros) => New Shooters => Topic started by: Shempatolla on June 18, 2019, 07:52:43 AM

Title: CZ P 10F feed issues
Post by: Shempatolla on June 18, 2019, 07:52:43 AM
anyone else having fail to feed issues with their new P10F ?
Iíve got maybe 200 rounds through mine both 115 grain and 124 grain and am getting intermittent but regular failure to feed a round. Theyíre getting hung up on the feed ramp.
Donít know if itís me or the gun.  My Grand Power XTrim eats the same ammo with no issues.


Thoughts?
Title: Re: CZ P 10F feed issues
Post by: Rodolfo Fierro on June 19, 2019, 07:30:35 AM
When I first got my 75B it had the same problem.  It turned out to be that the "rim" of the cartridge was hanging up on the extractor.  I removed the extractor and rounded the corner of it and polished it.  That cleared my problem.  Your problem could be the same from the sounds of it.
Title: Re: CZ P 10F feed issues
Post by: Shempatolla on June 19, 2019, 07:47:17 AM
Thanks.
I took the gun into the shop where I bought it.
We took it apart.  There appears to be a burr or mushroomed edge on the feed ramp.
CZ warranty is involved.  They may end up sending a new barrel.