Author Topic: CZ 457 trigger adjustment  (Read 338 times)

Offline Rootbeer

  • Newbie
  • *
  • Posts: 1
CZ 457 trigger adjustment
« on: August 12, 2022, 04:06:43 PM »
Hello folks, another newbie here. 👋
I just got a new 457 varmint 22 mag.  The trigger broke at 4.5 #.  Following the instructions I set about trying to adjust it down some.  The adjustment screw has no effect at all.  Even completely removed it still breaks at 4.5 #. 
I ordered a reduced pull spring for it, installed it and now itís 2.5# which Iím happy with but the adjustment screw still has zero effect on the pull wt. of the trigger.
I havenít shot it yet but still thinking there has to be something wrong/not functioning here. 
Any suggestions?

Offline frgood

  • Sr. Member
  • ****
  • Posts: 426
Re: CZ 457 trigger adjustment
« Reply #1 on: August 21, 2022, 05:07:25 PM »
Which screw did you adjust?
According to CZ the 457 has a range of 1.75 - 3.37#. You might want to check with CZ to find out why it was out of range out-of-the-box,