Author Topic: P10C owners  (Read 1956 times)

Offline 01svtL

  • Newbie
  • *
  • Posts: 3
P10C owners
« on: May 28, 2019, 10:08:57 PM »
P10C owners, if[/size] you’ve got a set of calipers, can you do me a fav[/color][/size]or and measure the slide thickness at the very ba[/color][/size]ck of the slide? I’d also like[/color][/size] to see the thickne[/color][/size]ss [/color][/size]measurement of the grip - right about midway.[/color][/size]Would be much appreciated!


For comparison’s sake, I measured the following of mine:Glock G48Slide: .89”Grip Thickness: 1.02”Grip width measured at trigger undercut: 1.88”Sig P320 XCompact Slide: 1.02”Grip thickness: 1.22”Grip width measured at trigger undercut: 1.72”Mossberg Mc1sc:Slide: .90”Grip thickness: 1.05”Grip width measured at trigger undercut: 1.90”It seems these are the measurements on the parts of the gun that are the most difficult to conceal. I am curious how the P10c stacks up against the P320 XCompact in these parameters.
[/color]

Offline CZ75BOmega

  • Newbie
  • *
  • Posts: 3
Re: P10C owners
« Reply #1 on: June 18, 2019, 10:30:30 AM »
Here are the measurements of my P10c:Slide width@rear = 1.0"Frame width@rear = 1.0"Grip thickness@midway = 1.28"Grip width front to back undercut = 1.84"