Author Topic: CZ Shadow2 reloading  (Read 3963 times)

Offline RHON

  • Newbie
  • *
  • Posts: 2
CZ Shadow2 reloading
« on: March 22, 2021, 04:04:07 PM »
I recently acquired a Shadow2. I need some opinion in reloading. I have a .355 and .356  bullet heads from BNB which I think have a different curve toward the tip (thicker) than that of SNS.  I can set the OAL to 1.09 to pass the plunk test. I'm using Titegroup and HS6, can someone help and tell me what their load is for a 125 gr. RN and 160 gr. RN to achieve the 125 PF? Other powder suggestion or any other general suggestion in reloading for the Shadow2 will be highly appreciated. Thank you in advance.
« Last Edit: March 22, 2021, 04:31:59 PM by RHON »

Offline chfields

  • Administrator
  • Hero Member
  • *****
  • Posts: 1620
Re: CZ Shadow2 reloading
« Reply #1 on: March 22, 2021, 04:48:33 PM »
While I only use 147gr RN Blue bullets now, I have loaded 124gr's with titegroup at 3.2GR and run the 147's @2.9. With the 160 you may be able to go down to 2.7 or 2.8 or less...My PF is over 130....in my SA
CZ 75B SA
Hogue Wraparound Rubber Grips with Finger Grooves
CZ Compact (Steel, No Rail)
CZ Rami BD 9MM
CZ 712 G3 W/extended mag tube
Member USPSA
Member IDPA
Life Member NRA
Captain of the CZForum.com shooting team
Proud Army Dad

Offline RHON

  • Newbie
  • *
  • Posts: 2
Re: CZ Shadow2 reloading
« Reply #2 on: March 22, 2021, 04:53:18 PM »
Thank you. What is your OAL?

Offline chfields

  • Administrator
  • Hero Member
  • *****
  • Posts: 1620
Re: CZ Shadow2 reloading
« Reply #3 on: March 22, 2021, 05:14:59 PM »
No problem!! My OAL is 1.13
CZ 75B SA
Hogue Wraparound Rubber Grips with Finger Grooves
CZ Compact (Steel, No Rail)
CZ Rami BD 9MM
CZ 712 G3 W/extended mag tube
Member USPSA
Member IDPA
Life Member NRA
Captain of the CZForum.com shooting team
Proud Army Dad