Author Topic: Kadet fouling  (Read 1901 times)

Offline Mwacton

  • Newbie
  • *
  • Posts: 1
Kadet fouling
« on: August 26, 2021, 01:52:48 AM »
Hello.


I have two CZ pistols, a 75B and a Compact.  When using the conversion kit on either lower, I get
An unmanageable amount of fouling in the .22 slide. It gets the point where shooting is done for the day.  The firing pin is goobered up a Ed won’t move. Sometimes the slide is too.


Anyone else experience this?  What is your solution?


Regards,


Whit

Offline Bucephalus

  • Newbie
  • *
  • Posts: 6
Re: Kadet fouling
« Reply #1 on: September 23, 2021, 08:14:30 PM »
First just let me say that I do not have the Kadet conversion so I can't speak from experience.
I have a tendency to run my 75B SA and my PCR a bit wet, probably more than needed. If you are like me, then try using a bit less lubricant that may attract the .22 gunk. Maybe that will help.


Good luck!