Forum Home

Firearms and Gear => Gear and Accessories => Topic started by: Cinimod on January 03, 2023, 11:51:04 PM

Title: KRG Bravo chassis for cz 457 magwell filler
Post by: Cinimod on January 03, 2023, 11:51:04 PM
I'm doing a winter build using the cz 457 action and the KRG Bravo Chassis. Trying to install a magazine into the magwell is not the easiest thing to do with the opening the chassis has. So I decided to look for one on the internet. I came across one but it is held in place with the front action screw. I don't like that idea so I decided to design my own. Included are pictures of the design which makes it easier to insert a magazine. This is 3D printed using abs it's held in place with the 2 screws show in the picture but not show is the part of the design that is inserted into the chassis magwell.
(https://i.imgur.com/ZtYt2Le.jpg)(https://i.imgur.com/BJRdQIH.jpg)(https://i.imgur.com/MdJnNyn.jpg)