Author Topic: SP-01 Tactical Strange Issue  (Read 2966 times)

Offline roamgun

  • Newbie
  • *
  • Posts: 5
SP-01 Tactical Strange Issue
« on: January 11, 2019, 06:16:03 PM »
Sent my SP-01 Tactical for warranty work in beginning of December 2018, received no update email for last two weeks. Is the company on holiday vacation? The gun is needed soon for a reviewed project. Any ideal to get the it back soon?Thanks a lot!Also the issue is strange, the gun will not fire in SA if the trigger was pulled very slowly. I thought I figured out the issue as shown in the photo below. But not sure.








Offline chfields

  • Administrator
  • Hero Member
  • *****
  • Posts: 1620
Re: SP-01 Tactical Strange Issue
« Reply #1 on: January 11, 2019, 06:44:25 PM »
I know they are usually pretty busy and turn around time can be 6-8 weeks depending on the issue. I would give them a call for an update.
CZ 75B SA
Hogue Wraparound Rubber Grips with Finger Grooves
CZ Compact (Steel, No Rail)
CZ Rami BD 9MM
CZ 712 G3 W/extended mag tube
Member USPSA
Member IDPA
Life Member NRA
Captain of the CZForum.com shooting team
Proud Army Dad

Offline roamgun

  • Newbie
  • *
  • Posts: 5
Re: SP-01 Tactical Strange Issue
« Reply #2 on: January 11, 2019, 06:58:05 PM »
Thanks!
I was able to talk with a representative. He did mentioned the delay because of the holidays, and promise to help if possible.


Offline chfields

  • Administrator
  • Hero Member
  • *****
  • Posts: 1620
Re: SP-01 Tactical Strange Issue
« Reply #3 on: January 11, 2019, 07:20:07 PM »
Glad to hear it!! Keep us posted.
CZ 75B SA
Hogue Wraparound Rubber Grips with Finger Grooves
CZ Compact (Steel, No Rail)
CZ Rami BD 9MM
CZ 712 G3 W/extended mag tube
Member USPSA
Member IDPA
Life Member NRA
Captain of the CZForum.com shooting team
Proud Army Dad

Offline roamgun

  • Newbie
  • *
  • Posts: 5
Re: SP-01 Tactical Strange Issue
« Reply #4 on: January 11, 2019, 09:18:49 PM »
Thanks!
I will update when I have the gun back.

Offline roamgun

  • Newbie
  • *
  • Posts: 5
Re: SP-01 Tactical Strange Issue
« Reply #5 on: February 17, 2019, 05:08:47 PM »
Finally I can update now.
First sent on Dec 9, 2018
Received on Jan 30, 2019
Found not repaired at all
Sent again on Jan 31, 2019
Received on Feb 15, 2019
So far seems OK.

Ugly Service on Beautiful Gun
Felt really bad since the gun is brand new and already repaired twice
At least had a good story for my blog now

Offline PappaWheelie

  • Full Member
  • ***
  • Posts: 135
  • "This is war, and in war, time is of the essence"
    • The Children's Bread
Re: SP-01 Tactical Strange Issue
« Reply #6 on: February 20, 2019, 07:21:32 PM »
I thought I figured out the issue as shown in the photo below. But not sure.

The "Not Match/Even" geometry is normal for decocker CZs that have right side only engagement between the hammer tooth and sear, the left side symmetry having been "sacrificed" to decocker function.
Good to hear it's working, here's a trigger job writeup that may impart confidence in figuring out the inner workings for yourself:
http://www.czforum.com/forum/index.php?topic=5599.0
And here's a link to CZ action animation: https://czfirearms.us/index.php?topic=73586.0


Member, Gun Owners of America
CC: CZ 2075 RAMI BD in PappaWheelie Invisible 15 Round RAMI Holster
Homeboy: CZ 97 BD, Underwood 45 Super 120 Grain Xtreme Defender ammo
UBG: CZ 75 SP-01 Tactical Urban Grey Suppressor-ready
-all w/ CGW Short Reset Kit/1485-T2 Disco, 5 "Thick" Trigger, polished SA tooth

Offline roamgun

  • Newbie
  • *
  • Posts: 5
Re: SP-01 Tactical Strange Issue
« Reply #7 on: February 20, 2019, 09:10:38 PM »
I thought I figured out the issue as shown in the photo below. But not sure.

The "Not Match/Even" geometry is normal for decocker CZs that have right side only engagement between the hammer tooth and sear, the left side symmetry having been "sacrificed" to decocker function.
Good to hear it's working, here's a trigger job writeup that may impart confidence in figuring out the inner workings for yourself:
http://www.czforum.com/forum/index.php?topic=5599.0
And here's a link to CZ action animation: https://czfirearms.us/index.php?topic=73586.0



Thank you so much. That is very helpful!