Author Topic: Adapting Magazine EAA to CZ  (Read 3852 times)

Josecz

  • Guest
Adapting Magazine EAA to CZ
« on: November 02, 2012, 08:58:37 PM »
Hi Boys
I'm from Venezuela, I have a CZ 85 Combat, I love my CZ.
lost a magazine, I can not in Venezuela, only Tanfoglio (EAA), Tanfoglio Magazine = closing  fail.

I can adapt a Tanfoglio (EAA) Magazine to work properly on my CZ?
 
Regards,
Josecz

kneelingatlas

  • Guest
Re: Adapting Magazine EAA to CZ
« Reply #1 on: November 03, 2012, 01:22:47 AM »
Sure it should be possible.  Small frame Tanfoglio mags and CZ75 mags share similar dimensions, if anything you may need to trim the hole where the mag catch goes into the mag body.

Josecz

  • Guest
Re: Adapting Magazine EAA to CZ
« Reply #2 on: November 03, 2012, 01:54:37 AM »
Sure it should be possible.  Small frame Tanfoglio mags and CZ75 mags share similar dimensions, if anything you may need to trim the hole where the mag catch goes into the mag body.
That's right,   catch hole magazine EAA is lower than the CZ Factory (+/- 2.27 mm ), the bullet is higher before entering the chamber, It is likely that the failure to be so close, I do not know.
 kneelingatlas, Thank you for your valuable feedback .