Author Topic: cajun trigger installed in P07 urban gray model.  (Read 2144 times)

Offline Frank

  • Newbie
  • *
  • Posts: 1
cajun trigger installed in P07 urban gray model.
« on: October 10, 2018, 09:38:24 PM »
New to the CZ forum. I Just bought this used CZ p07 urban gray model from a friend who installed the Cajun pro carry package along with the cajun over travel trigger. at the range and all is working fine up to around 150 rds in both single action and double action, then all of a sudden when trying to fire in double action only the trigger traveled all the way back to the rear of the trigger guard but won't the hammer won't release unless I squeezed the hell out of the trigger... this happen when I would pull the trigger slowly. there seems to be a little excessive trigger movement when i move the trigger side to side. or maybe  the over travel screw might be the problem or the trigger pin, any suggestions?

Offline Luger Fan

  • Jr. Member
  • **
  • Posts: 74
Re: cajun trigger installed in P07 urban gray model.
« Reply #1 on: November 24, 2018, 01:35:45 PM »
Call Cajun and explain things it to them. They are a FIRST CLASS operation and are wizzards with CZ's.

Offline Dvrdwn72

  • Sr. Member
  • ****
  • Posts: 268
Re: cajun trigger installed in P07 urban gray model.
« Reply #2 on: December 22, 2018, 06:13:45 AM »
Call cajun, ask for Dave, he has helped me alot when I had issues in the past.