Forum Home
Firearms and Gear => CZ Handguns => Topic started by: Mwacton on August 26, 2021, 01:52:48 AM
-
Hello.
I have two CZ pistols, a 75B and a Compact. When using the conversion kit on either lower, I get
An unmanageable amount of fouling in the .22 slide. It gets the point where shooting is done for the day. The firing pin is goobered up a Ed won’t move. Sometimes the slide is too.
Anyone else experience this? What is your solution?
Regards,
Whit
-
First just let me say that I do not have the Kadet conversion so I can't speak from experience.
I have a tendency to run my 75B SA and my PCR a bit wet, probably more than needed. If you are like me, then try using a bit less lubricant that may attract the .22 gunk. Maybe that will help.
Good luck!