Forum Home
Archived material => For Questions covering both listed and less well known => Topic started by: GhostWarrior on April 01, 2011, 01:59:04 PM
-
DanvilleBlues: had this to say on the 50 / 70 board. I think it belongs in both places so I am doing a cut and paste so he can get a larger supply or replies.:
(http://www.czforum.com/Themes/default/images/useron.gif) (http://www.czforum.com/forum/index.php?action=pm;sa=send;u=290)DanvilleBlues (http://www.czforum.com/forum/index.php?action=profile;u=290)Cz70-Slamfire (http://www.czforum.com/forum/index.php?topic=279.msg1113#msg1113)« on: March 28, 2011, 12:01:33 AM » For all you gunsmiths here, Just bought a slightly used, CZ70, shot for the first
time today, no failures to feed, fire & eject, but at times with one trigger pull
it would fire 2 rounds, and at times 3. I think it is probably the sear.
Anyone have this problem?
-
I had a Star BM that did that to me once.
Have you looked at the hammer to sear interface yet?
Mine had some junk built up on it, once I cleaned it up with a scraper and a little light stoning to smooth it back out it worked like a champ.
That was three years ago, no problems since.
-
Welcome to the CZ Community
-
Welcome to the Forum armyman62 and thanks for posting that reply. We hope you enjoy your time with us and that's it's for an extended period. Also please feel free to keep posting any and all suggestions you have if someone asks a question. We are all here to help each other and learn from each other. Welcome again. Glad to have you. and presuming your SN is what it says thank you for serving.