Author Topic: CZ75 Master Gunsmith needed  (Read 1280 times)

Offline shootingisfun

  • Newbie
  • *
  • Posts: 24
CZ75 Master Gunsmith needed
« on: January 12, 2020, 02:58:47 PM »
Have two pistols that need work, a pre B and a Sphinx AT2000   The pre-b, with the hammer down, if you pull it back, the safety will automatically set itself to safe.  To shoot the pistol you have to flick the safety off before every pull of the trigger.    The Sphinx, with the hammer back and the safety on, if you pull the trigger twice the safety will move to the off position on the second pull and fire.


Looking for a CZ 75 guru who would be able to solve these issues.  I have already checked around at the obvious places, no luck.


Thanks

Offline frgood

  • Sr. Member
  • ****
  • Posts: 429
Re: CZ75 Master Gunsmith needed
« Reply #1 on: January 13, 2020, 05:31:26 AM »
I am not sure but you may want to check https://ortizcustomguns.com/. Pedro Ortiz has a good reputation with CZ's. I've had him work on my TS with great success. Give him a call to find out what experience he has with your models.