Forum Home
Trading Post (Classifieds) => Old Classifieds: Sell, Trade, or Barter. => Topic started by: clemsonite on October 03, 2011, 10:26:30 AM
-
After lot of research and $$$ into finding the perfect fitting screws for my guns, I have found these. All you need is 2.5 Allen Key from your own tools to screw and unscrew these.
I am selling them in sets of 2 Screws ($12 Including Shipping) or 4 Screws ($20 Including Shipping)to replace your factory screws and you Do Not need washers for these screws. If you need more than 4 screws send me a PM and I will provide the price (With Great Discounts). PayPal Preferred Will accept USPS Money Order or Personal Checks.
Make sure that you do not over tighten the screws. After you finger tighten the screw you need a 45 degree turn to get the grips secured.
Ask questions before buying. I know for sure these will fit perfectly (Tested on CZ75B & CZSP01) and are great addition to your guns.
Please check out the links below for feed back,
http://www.ebay.com/itm/330690334727?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 (http://www.ebay.com/itm/330690334727?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649)
Here is my Listing for 2 Sets:
http://www.ebay.com/itm/330615474121?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 (http://www.ebay.com/itm/330615474121?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649)
Over 400 Sets Sold Here and on ebay with 100% Satisfaction from the Buyers
(https://lh6.googleusercontent.com/-8PY7KPSGGu4/TonOAMDg6vI/AAAAAAAAA-g/yuI74PAEL64/s400/2011-08-12_16-25-45_496.jpg) (https://picasaweb.google.com/lh/photo/w07qGoTKRap-8imogBCLjQ?feat=embedwebsite)
-
I need some clarification. For $12 I get two or four screws?
-
Sorry for the confusion. $12 for 2 Screws & $20 for 4 Screws. I have great feedback for these screws on EBAY.
-
What is link for ebay.
-
http://www.ebay.com/itm/330601015706?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649#ht_1568wt_148 (http://www.ebay.com/itm/330601015706?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649#ht_1568wt_148)
Here is my Listing for 2 Sets
http://www.ebay.com/itm/330615474121?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649
-
Please check my feedback on ebay for these screws.
(https://lh4.googleusercontent.com/-cp9EeYgWIIs/Tq2vSeI1rkI/AAAAAAAAA-w/CCPmpdcy570/s800/Untitled.png)
-
HI, will they fit a P-01?
-
I do not know for sure but, they have the same specs as factory issued CZ 75 screws. If you have both the guns please try to see if they are interchangable.
-
And the answer is yes they fit the P-01 sweet as you could wish for.look nice also.
Mery Christmas, and Happy Holidays
-
HI, will they fit a P-01?
Please see Ghost Warrior's response.
-
Nice screws. No need to make bump posts though. Thank you.
-
Now no more bumps, it's a sticky and shall lead the parade here from now on. Merry Christmas, Happy Holidays, Best of times, Nemaste (only Indian greeting I know, even if it's more religious than just hello.) Any way you cut it, Thank you for finding these.
-
Thank you for making this a sticky. So Ghostwarrior, how did you like the stainless screws I sent you?
-
Very nice btw and thank you. Hows the search for shorter screws for the RAMI and such pistols?
-
I have already spent $60 to find other screws with no luck.
-
How long are the screws from top of head to end?
-
Screws measured to be 11mm or 7/16". Thank you for your interest.
-
I wrote that down and if they let me out of the house I'll see if I can look around also.
-
I wrote that down and if they let me out of the house I'll see if I can look around also.
The measurements are for the screws I have. I did not realize that vikingman was refering to RAMI Screws. Sorry for the confusion
-
No, it was for the screws you have, not RAIMI screws. You were correct. :grin:
-
Did you say you have these in stainless?
-
Serrano,
No I have not found SS screws yet.
Thanks for your interest.
-
Still have these available?
-
Yes, I do. Let me know if you are interested.
-
I am, I'd like to pick up 2 sets.
-
PM sent.
-
Awesome, payment sent thank you!
-
Really glad you still have the screws available, if you find any Stainless Steel ones please let us know ASAP. I know I'll pickup a few sets to go with the black ones I already have and use. Those (the black ones) work like a charm, look great, and I have a couple pistols that the S/S ones would rock on.
GW
hope everyone has a pleasant Memorial day.
-
Not to derail thread, but there are some stainless screws on EBay if
You are looking for them - http://m.ebay.com/itm/150954766749?nav=SEARCH