As most Kadet and other Conversion Unit owners know, those pesky .22lr Magazines can be a real bear to load
And most readers of the Kadet Klub Forum know I have modded both, the HKS and the UpLULA Magazine Loaders so they will load those pesky CZ Kadet and other .22lr Magazines, which I call the "K" mods
Well, I also sell the Loaders I mod
The HKS-K Magazine Loaders are a model specific Loader and will load the .22lr Magazines along with all other Magazines list under the standard HKS model i.e.the HKS-940 are for CZ75 types, Sig 226/228, HKS-940, HKS-941 and HKS-452 are for the Witness and a few other Pistols
The HKS-K will still load the Centerfire Cartridge in addition to the .22lr Conversion Mags within their model group
For a Kadet, .22lr modded HKS-940, 941 or 452 (the HKS-940-K etc), I am asking $28.00, shipped
If you’re looking for a “One Loader does all” kinda Loader, try the UpLula-K
The UpLula-K will load most any Magazine, .22lr thru .45acp, Single or Double Stack
The total cost for an UpLula-K is $56.00 shipped via USPS Priority Mail
I know $56.00 is a lot to pay for a Magazine Loader
But with the Raw UpLULA costing around $35.00 (plus shipping), you get what you pay for
And the UpLula-K
IS a One Loader does (most) all kinda Loader
Yes, you can buy MagLULA's new 22UpLULA for less (around $35.00), but it
ONLY loads Rimfire Rounds....
NO Centerfire RoundsTo see a few pics of the UpLula-K compared to a Standard UpLULA and what the Engraving looks like, check out this Post:
http://www.czfirearms.us/index.php?topic=24219.msg275984;topicseen#msg275984I am also offering the new Snap-on, MagLULA 1911-A1 Single Stack Alignment Tool for the UpLula-K, for an additional $13.00
This little number make loading Single Stack Mags a real breeze....Even some of those skinny Mk-Series Ruger, Buckmark or Woodsman Magazines:
http://maglula.com/PistolMagLoaders/1911AI™AlignerInsertforUpLULAand22UpLULA.aspxTo see the UpLula-K in action, check out these YouTube Videos:
JoeL has well over 30,000 Rounds loaded using his UpLula-K
Great job Joe.....Thank you
I am now modding the HKS-22R (Ruger MkI and MkII) Loader to work with all three Ruger;
MkI, MkII and now the MkIII
The HKS-22R-MkIII is $15.00 shippedFor an additional $2.00, I can add a nice Strap and Carabineer to either the UpLula-K or the HKS-22R-MkIII
That way you can just clip your Loader to your Belt Loop....See below for a couple pics of the UpLula-K-Plus and the HKS-22R-MkIII-Plus
OR;If you have a standard UpLULA or HKS and would like it modded to handle the Kadet and other 22 Mags, I can do that
I can mod your existing Magazine Loader(s), or you can order / buy one (from whom ever) and have it shipped directly to my address, I'll mod it, then ship it to you
Total cost is $20.00, shipped back to you via USPS Priority Mail
Please contact me for more information on this at:
DenStinett@aol.comIF YOU’RE ORDERING A LOADER FOR A GIFT, LET ME KNOW......
I need to know the First and Last Initials of the person it’s going toPlease take note: There is an extra charge for shipping out of the US....If you really, REALLY want one, let me know and I'll check shipping costs for youThe usual turnaround time is approx ten business days
For those who don't already know, I drive Truck for a living (if you can call it a living) so there are times where I am gone for days, sometimes weeks at a time
So now the turnaround times can very
For questions or info on ordering, please e-mail me at:
DenStinett@aol.comor my cell No. is: 949-254-5812
I truly believe;
"Every thumb deserves a good Magazine Loader"Thanks for the read
Shoot safe all, Den S
The HKS-940-K
The UpLula-K
For an additional $2.00, I can add a nice Strap and Carabineer to either the UpLula-K or the HKS-22R-MkIII, like this…..
The UpLula-K-Plus
The HKS-22R-MkIII-Plus