Forum Home

Firearms and Gear => Reloading and Ammunition => Topic started by: Speed0verdose on July 15, 2017, 06:19:16 PM

Title: What press do you have?
Post by: Speed0verdose on July 15, 2017, 06:19:16 PM
Let's see what kind of press everyone has. Post pics of your setup if you have them!


Dillon 1050 here with a Mister Bullet Feeder
Dillon 550B, stock with the aluminum roller handle
Title: Re: What press do you have?
Post by: Rodolfo Fierro on July 16, 2017, 08:05:34 AM
I like to make a comment about this subject, which comes up time to time:  Guys like the press that they have, that's why they bought it. 
I like my Hornady  Lock N Load.
Title: Re: What press do you have?
Post by: frgood on July 16, 2017, 11:04:29 AM
Lee Turret
Lee single Press
Dillon SDB
Dillon XL 650

I have what I need to get my jobs done.
Title: Re: What press do you have?
Post by: chfields on July 16, 2017, 11:55:11 AM
I have a Hornady lock and Load....
Title: Re: What press do you have?
Post by: Dvrdwn72 on September 27, 2017, 07:57:29 PM
Dillon 650 here,,
Title: Re: What press do you have?
Post by: CatsEye on September 28, 2017, 04:11:36 PM
Dillon 650
Lee Pro 1000
Title: Re: What press do you have?
Post by: IDPASUX on October 20, 2017, 03:01:32 PM
Dillon 650 w/ homemade bullet feeder
Lee Loadmaster
Lee Classic Turret Press
Lee Single Stage

Title: Re: What press do you have?
Post by: old tanker on October 20, 2017, 03:07:30 PM
RCBS Jr
Lyman Spar-T
Bonanza Co-ax
Title: Re: What press do you have?
Post by: Smac on October 22, 2017, 02:44:46 PM
RCBS Rockchucker been reloading for 30+ years.
Title: Re: What press do you have?
Post by: Hasaf on July 04, 2018, 07:46:29 AM
I realize this is an old thread; but to the chagrin of some, I will answer anyways. To do otherwise leaves similar information scattered through multiple threads.


I also use a Lee Classic Turret with the auto index rod. I have been giving some thought to the new Auto Breech Lock Pro, However, I think I will wait until it has been out for a while. In anther forum I read there were a lot of primer feed issues.
Title: Re: What press do you have?
Post by: J Mercurio on July 06, 2018, 07:32:31 PM
Dillon 650...
Title: Re: What press do you have?
Post by: noylj on September 11, 2018, 06:46:50 PM
I have three 1050s, a Co-Ax, and a $25 Lee Reloading Press.
I really like the Hornady L-N-L and used it for several years (until my wife found a 1050 for sale for $800). The L-N-L went to my son.
For me, a progressive press must have at least 5 die stations (not a dedicated priming station and four other stations) and have auto-indexing. Manual indexing, to me, is asking for a moment of inattention and either not charging a case or double charging a case. YMMV, but I take MY safety seriously.
Die stations, at a minimum, are:
1) sizing (with priming often on the down-stroke)
2) combining case expansion, case mouth flaring, and powder dispensing using a Lee, Hornady, or Dillon measure with appropriate powder-through expansion insert in the powder die
3) RCBS Lock-Out die to verify correct powder height in case
4) Inspect powder column in case and Seat
5) Crimp
If you must have a case collator, get the Dillon 650. If you want to stop worrying, get the 1050 and be done.
Title: Re: What press do you have?
Post by: J Mercurio on October 18, 2018, 10:34:30 PM
Hoping to upgrade to a Mark 7 real soon..
Title: Re: What press do you have?
Post by: techiede44 on October 20, 2018, 01:47:27 PM
Hornady LNL AP
Title: Re: What press do you have?
Post by: Terry on October 28, 2018, 08:40:45 PM
Rockchucker, Redding T-7 Turret, and Hornady Lock-n-Load Progressive.
All three have their uses for various things I do. I wouldn't part with any of them and feel that I truly "need" all three.
Title: Re: What press do you have?
Post by: DiddlyV on July 26, 2020, 05:49:15 PM
Lyman T-Mag II the turret bolt broke on the T-Mag and they don't make that bolt anymore.  Had to buy a new press.  The original T-mag lasted 15 years or so before I broke the bolt