Forum Home

Firearms and Gear => CZ Long Guns and Carbines => Topic started by: tenntrapper on March 30, 2013, 08:25:23 PM

Title: 452 threaded barrel
Post by: tenntrapper on March 30, 2013, 08:25:23 PM

My first post is a question. Last month I was at LGS and found a NIB 452 american with the 16 inch threaded barrel. I am wondering how common this weapon is. I didn't see it on the CZ website. And yes, it does belong to me now. Also found a NIB satin nickel CZ 83, It came home to. Thanks for info

Title: Re: 452 threaded barrel
Post by: Angryvikingman on March 30, 2013, 09:05:34 PM

Idk, but if you own a 22 suppressor, make sure you check the spacing between the threading and the first baffle of the suppressor. When using mine on a rife I always have to use at least 1 crush nut to ensure proper spacing. If its too close to the first baffle, then it won't suppress properly.

Title: Re: 452 threaded barrel
Post by: tenntrapper on March 30, 2013, 09:26:02 PM

Thanks for the reply and info. Was considering a suppressor, but havnt got one yet. I read somewhere the thread was different than standard American threaded suppressors. Is this true? Is there an adapter available? Also, if using an adapter, would your reply, still apply?

Title: Re: 452 threaded barrel
Post by: Angryvikingman on March 31, 2013, 09:46:59 PM

Most 22lr ars threaded in 1/2x28. Standard pitch for a lot of suppressors in .223 and 22lr.

Title: Re: 452 threaded barrel
Post by: jollyscotsman on September 21, 2014, 09:13:28 AM

the 16" barrel is very common over here in the uk, on the 452 ,in both .22lr and .17hmr,with the threads being 1/2" unf for the moderator. :cool: