Author Topic: Need Stronger Spring for 9mm RAMI 14-rd Extended Magazine  (Read 59 times)

Offline Geobob

  • Newbie
  • *
  • Posts: 31
  • Dum Spiro Spero
Need Stronger Spring for 9mm RAMI 14-rd Extended Magazine
« on: June 13, 2018, 02:38:54 PM »

Greetings, everyone


Any suggestions as to where to get a stronger spring for the RAMI 9mm 14-rd magazine?  I checked with Wolff Springs and they don't carry them (working on it, but not yet).  I need a stronger than factory spring for the extended mag to help with cartridge feed when using a suppressor; the added weight affects the barrel/chamber ramp movement during firing cycling and causes fail-to-feed (bullet head hits bottom of ramp). The smaller 10-rd mag feeds perfectly fine (probably a stronger spring action).


Thanks!
Geobob
US Navy P-3 Pilot, US Army Huey & Blackhawk Pilot (ret.)

Online chfields

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1483
Re: Need Stronger Spring for 9mm RAMI 14-rd Extended Magazine
« Reply #1 on: June 13, 2018, 09:26:19 PM »
I read somewhere that someone used a 15rd glock 19 mag spring and it seemed to be stronger than the stock Rami.....
CZ 75B SA
Hogue Wraparound Rubber Grips with Finger Grooves
Kadet Kit
CZ Rami BD 9MM
Member USPSA
Member IDPA
Life Member NRA
Captain of the CZForum.com shooting team
Proud Army Dad

Offline Geobob

  • Newbie
  • *
  • Posts: 31
  • Dum Spiro Spero
Re: Need Stronger Spring for 9mm RAMI 14-rd Extended Magazine
« Reply #2 on: June 14, 2018, 02:22:40 PM »
Thanks, CHFields - much appreciated!  I'll check it out.
Geobob
US Navy P-3 Pilot, US Army Huey & Blackhawk Pilot (ret.)