Author Topic: Lock back issue with new P10c  (Read 1647 times)

Offline jimmyj321

  • Newbie
  • *
  • Posts: 5
Lock back issue with new P10c
« on: May 30, 2018, 10:13:02 PM »
I am having an issue with my new P10c. When shooting the slide locks back at random. Could happen once  or multiple times. Have had as many as 5 on one 16 round magazine and as few as one. I did the following, new firing pin, new slide spring and SS rod. Anyone experienced this. The only parts I see that could cause this problem are the slide stop and the slide stop spring. They were handled during assembly and re-assembly. How would I go about sending it back to CZ if no one has a solution? Just call and get an RMA? Is their customer service any good?

Offline Rodolfo Fierro

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 640
    • TRAIN 2 SHOOT
Re: Lock back issue with new P10c
« Reply #1 on: May 31, 2018, 03:24:33 PM »
Could it possibly be the magazine/s, just guessing.