Author Topic: Sight install  (Read 4636 times)

Offline GM4469

  • Authorized Vendor
  • Hero Member
  • *
  • Posts: 545
Sight install
« on: January 08, 2012, 04:19:08 PM »
Someone had asked me about sight installs.
Here is just a quick reference. Should work for any of the newer CZs that have the dovetail front sight ( vs the pre B tenon front sight )


Slide installed in vise


drive out front sight pin


drive out front sight


Install new front sight and use drill to drill groove in bottom of sight for front sight pin


Install front sight pin


Loosen set screw and drive out rear sight


Drive in new sight


All done
« Last Edit: January 08, 2012, 04:22:25 PM by GM4469 »
czcustom.com
stuart@czcustom.com

Offline Angryvikingman

  • Senior Writer/Editor/Moderator
  • Hero Member
  • *****
  • Posts: 949
  • Si Vis Pacem Parabellum
Re: Sight install
« Reply #1 on: January 09, 2012, 07:38:48 PM »
EXCELLENT! Thanks a lot GM! I'm sure this will help lots of people.

Kevin J

  • Guest
Re: Sight install
« Reply #2 on: January 09, 2012, 10:02:36 PM »
Thanks GM. That was really helpful. I got the rear tactical sight you recommended and put it on along with a fiber optic front sight. It went pretty much as you showed but I had to do a bit of filing to make them fit properly. I ended up scratching the new new sights a little but at least they're on!

Offline GhostWarrior

  • I'm very humble, you can ask me.
  • Administrator
  • Hero Member
  • *****
  • Posts: 3039
  • Benefactor & Life Member NRA
Re: Sight install
« Reply #3 on: January 10, 2012, 11:45:23 AM »
Nice walk through. Thanks for the post. Now if I can get my hand to stop shaking long enough to hold the drill steady and straight................... :rolleyes:
If at first you don't succeed, then Skydiving is not your sport.

Welcome Home every Veteran and active Service personnel and Thank you from the bottom of my heart for your sacrifice

Tug

  • Guest
Re: Sight install
« Reply #4 on: January 17, 2012, 11:26:39 PM »
Thanks you made that look pretty easy