Where can I get a RAMI BD?

[Sprags]

Way back in April or May I got my first CZ firearm. A CZ 75 BD. It has about 500 rounds through it and it shooting just fine. I really like it.


I liked it so much I decided I wanted a RAMI BD as a CCW. The only problem is, is that they don't seem to be available.


I did get a P-01 in the mean time and it has about 200 rounds through it and it is breaking in very nicely.


I found a source for a RAMI with a manual safety and I'm considering just buying it but I really like the de-cocker feature. Even my Sig P226 has a de-cocker. To me it seams that is a good feature to have if the firearm is going to be used as a carry weapon.


So. Did CZ stop making RAMI BD's? Or did CZ USA just stop importing them? I got on a waiting list at Buds Gun Shop way back in August and either I am way down on the waiting list or Buds waiting list really doesn't exist. At least that's the way it seems.


Do you think Trump can help me get a RAMI BD once he gets sworn in? OK sorry for the politics.

[CZ-RAMI-2075]

https://www.slickguns.com/product/cz-usa-cz-2075-bd-rami-01754-9mm-3-barrel-10-rnds-57713


The BDs not in red might be in stock.


Having Nites ffrom the factory makes them more expensive than a regular RAMI,
but those sights are really nice..esp. during these darker winter months.

[Sprags]

Thank you for the reply. It looks like they just are not available. I checked the links not in red and they did not have them either. I may consider getting a manual safety RAMI. And since I'm considering a manual safety I figure before I make purchase I should see a size comparison of the RAMI next to a P-01. So is there a chance someone that has one along with a P-01 can photograph the two so I can see how much smaller the RAMI really is? Maybe the P-01 will work just fine as a carry weapon.

[Chino Hills]

I have a RAMI but not one of the others, P-01, etc. so can't provide any pics. The P-01, P-06, PCR, Compact are all quite similar in size so a Google search (RAMI versus CZ PCR size comparison)  for images will likely bring up comparative shots.  I found some side by side images, etc., back when I was shopping.  About 3/4" shorter in length and 1/4" shorter in height.  I held them side by side when shopping and the RAMI is certainly smaller.  However, while the smaller size makes it somewhat more easily concealed, the P-01 isn't all that large either. 

[CZ-RAMI-2075]

http://s204.photobucket.com/user/czrami/library/RAMI-P-01?sort=3&page=1

[Sprags]

Thanks for the side by side photos. Two weekends ago I was lucky enough to see a 2075 RAMI BD at the local gun shop. It was used and it seems like it was abused. The frame had gouges along the slide rail edges, trigger guard and the mag well. I can't see how those gouges could have gotten there under even rigorous use.


At least I got to put my hands on it and compare it to a P-01. It makes me want one more though I am considering an FNH-9.


There is a gun show this weekend and perhaps one will be there.

[milkcoma]

you guys are making me want to get one of these.

[CZ-RAMI-2075]

THey come over in batches from the factory.


I'll probably end up buying one before I get a P10C/


It would be nice to be able to play in the sandbox with the big boys
and their P10Cs , but i'll have to wait a while for the FDE
version.

[CZ-RAMI-2075]

Any new owners, RAMI Or RAMI BD?

[CZ-RAMI-2075]

IN Stock: DE GUNS.https://www.deguns.net/CZ-USA-CZ-2075-Rami-BD-9mm-14rd-Decocker-Pistol-p/91754.htm

[CZ-RAMI-2075]

Thanks to the good folks @Cz-uSA. I now have a new RAMI BD.


More pics and a review to follow.


Waiting for better lighting and no rain, will shoot on Friday.

[chfields]

Congrats on the new Rami!!

[CZ-RAMI-2075]

Thanks , buddy!


It's still a bit tight in the mag catch, but it will lossen up a bit after firing a couple
hundred rounds.

[CZ-RAMI-2075]

Shot it today@4-7 yards. Had some failure to close on a couple rounds of my Magtech 9mm ammo, but it ran fine with the S&B and Double Tap 115 grain. Still fairly stiff mag catch, but it's getting better.
[/size]

[Sprags]

I posted that I finally was able to land my hands on a RAMI BD. The dealer listedit as New and for all intents it appears to be new. The only thing being that the grips are loose. I see I can buy shorter screws that will probably do the trick. That being the case I may want to buy some aftermarket grips as well. Can someone tell me a good source for aftermarket grips?