Author Topic: Trigger job and tools needed  (Read 3124 times)

Leo

  • Guest
Trigger job and tools needed
« on: March 15, 2016, 09:55:23 AM »
I have a worn sear and hammer laying around and was wondering if anybody makes a sear reprofiling jig for the CZs similar to the ones offered for 1911/2011s?  I want to tinker with these parts to give me a better understanding of how these these 2 parts engage and possibly do my own trigger jobs in the future.

Offline frgood

  • Sr. Member
  • ****
  • Posts: 429
Re: Trigger job and tools needed
« Reply #1 on: March 29, 2016, 06:22:43 AM »
While it may exist, I have not heard of one advertised. I might suggest getting a look at a Tactical Sport .40 or 9mm. The factory trigger is ~1 3/4 lbs. and is about as crisp as one can get while remaining reliable. It would be worth the time to compare geometry with the 75.

Offline Dvrdwn72

  • Sr. Member
  • ****
  • Posts: 268
Re: Trigger job and tools needed
« Reply #2 on: March 29, 2016, 06:55:33 AM »
Diamond file,,

Offline PappaWheelie

  • Full Member
  • ***
  • Posts: 135
  • "This is war, and in war, time is of the essence"
    • The Children's Bread
Re: Trigger job and tools needed
« Reply #3 on: August 11, 2016, 10:45:25 PM »
Member, Gun Owners of America
CC: CZ 2075 RAMI BD in PappaWheelie Invisible 15 Round RAMI Holster
Homeboy: CZ 97 BD, Underwood 45 Super 120 Grain Xtreme Defender ammo
UBG: CZ 75 SP-01 Tactical Urban Grey Suppressor-ready
-all w/ CGW Short Reset Kit/1485-T2 Disco, 5 "Thick" Trigger, polished SA tooth