Forum Home

Firearms and Gear => General Discussion => Topic started by: Leo on March 15, 2016, 09:55:23 AM

Title: Trigger job and tools needed
Post by: Leo on March 15, 2016, 09:55:23 AM

I have a worn sear and hammer laying around and was wondering if anybody makes a sear reprofiling jig for the CZs similar to the ones offered for 1911/2011s?  I want to tinker with these parts to give me a better understanding of how these these 2 parts engage and possibly do my own trigger jobs in the future.

Title: Re: Trigger job and tools needed
Post by: frgood on March 29, 2016, 06:22:43 AM

While it may exist, I have not heard of one advertised. I might suggest getting a look at a Tactical Sport .40 or 9mm. The factory trigger is ~1 3/4 lbs. and is about as crisp as one can get while remaining reliable. It would be worth the time to compare geometry with the 75.

Title: Re: Trigger job and tools needed
Post by: Dvrdwn72 on March 29, 2016, 06:55:33 AM

Diamond file,,

Title: Re: Trigger job and tools needed
Post by: PappaWheelie on August 11, 2016, 10:45:25 PM

These writeups may be helpful: both DIY, both ending with slimy-smooth SA pulls-
http://www.czforum.com/forum/index.php?topic=4798.msg20513#msg20513 (http://www.czforum.com/forum/index.php?topic=4798.msg20513#msg20513)
http://www.czforum.com/forum/index.php?topic=5057.0 (http://www.czforum.com/forum/index.php?topic=5057.0)


Results summary (pull forces):
http://www.czforum.com/forum/index.php?topic=5028.msg21371#msg21371 (http://www.czforum.com/forum/index.php?topic=5028.msg21371#msg21371)